SOAP-making technique

It is on the process of cold soap-making.

SOAP, equipment manufacturing

To safely House soap, it is essential that the specific proportions of the ingredients of SOAP are scrupulously followed.

It is strongly recommended to use specialised software to calculate the proportions for each ingredient, and run it every time a new recipe is tested. There are many types of software for this purpose. There are even iPhones apps.

Some basic equipment must be used in the preparation of SOAP and soap-making ingredients:

-an exact scale.

-a rapid read thermometer says;

-some small cups to measure; a stick Blender to mix oils with the mixture of laundry and start the process of saponification;

- and moulds of soap.

Here is an example of the proportions for various soap ingredients:

-450 grams of vegetable fats;

-170 millilitres of water

-60 grams of caustic soda

SOAP making

Preparation of the ingredients in SOAP

Manufacture of SOAP requires that water, caustic alkali and fats or oils.

It is very important that caustic soda is gently poured water and never otherwise which will cause a kind of explosion and splash produces corrosive on your body. Naturally, the temperature of the mixture of water and soda rises up to about 190 ° F, or 90 ° c.

Therefore a (Pyrex) glass or stainless steel container must be used. Do not use a container in plastic as it would be melting due to the high temperature. Don't forget that aluminium is undermined by the soda. Always use wooden spoons to incorporate soda.

Mix the ingredients in SOAP

Temperature of baking soda must fall to 95-105 ° F (35-40 ° C) and the oil must be heated to 130 ° F (55 ° C). After checking these temperatures with a specific rapid read thermometer, slowly pour and caustic soda in the heated oil. Once the two ingredients are mixed, you can use a stick Blender to mix the oil with the mixture of laundry. Stirring the mixture of lye-water-oil with the stick Blender, you enable mixer short bursts. Mix for 3 to 5 seconds and then incorporate the most.

Once you start using the stick Blender, you can see oil goes cloudy and the mixture of SOAP are starting to come together. Keep the mixture in short bursts until the oil and water of laundry are completely mixed. This should not take more than 30 to 40 seconds.

Now you are almost the scene called "trace". Using the stick mixer allows to trace in under a minute, while if you use a wood or plastic spoon must be 10 75 minutes for the same result.

Secret successful SOAP manufacturing

Trace is the term to describe the consistency or the thickness and the scene where the mixture of hand SOAP is ready to be paid in mussels. Tracing is easy to recognize. Using a plastic spatula, drizzle a small amount in the top of the soap mixture. If a mark or trail remains for a few seconds before disappearing once more, your SOAP has traced. The mixture should have the consistency of pudding or liquid honey.

Your personal touch in your soap home

Now is the right time for you can add your own additives (essential oils, honey, milk, etc.) before pouring the mixture in mussels SOAP, you may already be lubricated with petroleum jelly.

You can now cover the mould with a cloth and allow to stand for 24 to 36 hours to get hold of the SOAP. In effect, saponification lasts at least 24 hours and, during this period, the SOAP is corrosive. You must be especially careful to keep the children away from her during this period of time.

After manufacturing of SOAP

After that, you can take the SOAP out of the mould and rinse to remove any excess of laundry.

However, soaps are still quite soft, and you need to allocate approximately 6 weeks to be completely dry and hard.

Example of SOAP recipe

Various SOAP recipes are found on websites on soap. For example, here is a very simple recipe:

-450 g of coconut oil;

-700 grams of olive oil;

-450 grams of vegetable fats;

-600 millilitres of water.

-223 grams of caustic soda.

I couldn't believe it when my wife told me that supposed "natural" SOAP, that I was very happy to use a staining my shower screen; and it's true! She gave me a natural hand SOAP, and it was a discovery for me. Peppermint SOAP is so sweet on my skin and so refreshing! I had never felt such a thing. This started my passion for the natural facts, hand crafted soaps. I started to research what were made soaps to and was terrified when I learned what they put in commercially produced soaps! Immediately I decided that I had the mission to inform people about the risks with soaps purchased at the supermarket and promote the natural handmade soaps. It was not a big problem for me that I was already a specific user of natural medicine with essential oils. I hope that you enjoy reading and learning the techniques of bar or liquid soap-making and start to make your own natural soap from home!
Visit my Web site at http://www.homemadesoapstore.com to learn all these different techniques.

Why I like to melt and for the manufacture of SOAP

I like to do soap using the melting and for SOAP-making process. In my experience, it is the easiest way to make your own facts to hand SOAP. A good recipe is a must if you are just starting, but once you are experienced, you can make up your own recipes and get really creative. What a SOAP Double Chocolate Brownie?

Melt and pour soap comes in soap blocks, ready to melt and pour into the mould of your choice.
But the exciting part is once you have melted the SOAP block. Then you can add your own choice of coloring additives, perfumes and pleasure of SOAP; for example, oatmeal, flower petals or herbs.

Once this is done, it is time to pay in moulds of your choice. There are some really cute SOAP molds. For example, hearts, flowers, shells, gingerbread men, and many others.

Melt and pour soap takes only a few hours to set at room temperature. If you do not want to wait a long time, you can place the mould in the refrigerator for about an hour. But never to place the mould in the freezer.

Once the SOAP was defined in the mould, it is time to unmold it. Just turn the pan upside down on a clean surface soft (therefore the SOAP chip if it comes with a rush) and SOAP should pop out. If you have difficulty getting SOAP out of the mould, run some hot water on the basis of the mold and try again.

Your hand very own SOAP is now ready to use! It is great gifts to give to your friends and family, especially if you use of mussels minions such as those mentioned above. I know that my friends are impressed, when I give them beautifully scented and colourful heart or flowers in the form of soaps and say that I made myself.

Therefore pleasure to make your own iron and remit of SOAP. The only problem is, once you start, it is difficult to stop!

Jennifer Christine has a passion for manufacturing of Soap Super! Take your free exclusive mini report, Secret online Soap Making Supplies when you visit [http://www.][MakeYourOwnSoapToday.com] and find out how you can make your own hand made SOAP today!

Discover how fun Soap Making is for you!

Looking for a new hobby to keep you busy? There are several options you can try, but the manufacture of SOAP is very interesting. Imagine using SOAP you have your own customized. Who would not be a good idea? Instead of using the old, boring white SOAP bar you use, you can now have all the days of different soaps.

People are very well in this because it allows to be very creative. There are different ways to actually make soaps. It all depends on how you want to make your SOAP. There are the melting method and pay, hot processes, processes of cold and the SOAP making process handmilled.

If you plan to start now to this activity, the first things you need to know are the substances that are used to manufacture these soaps. Soaps are mainly made of mixture of oils and fats. This is called the saponification process. You can use the fats of animals or even vegetable. Other ingredients also include color, essential oils and dyes. Just mix everything to obtain ideal SOAP that you want to.

If are trying to SOAP for the first time, you can start with the melt and method. It is a simple process because everything is ready for you. You just have to melt the base SOAP to make liquid soap. The next step is the addition of additives to modify your SOAP. Pour soap in mussels and let harden. This is how it is easy.

Cold soap-making process is probably a no-hassle method that you can try. First of all, it is important to mix the laundry with water. Once that this is done, add the fat in the mix until it forms an emulsion. Additives to go in the next, so add whatever you want in the mixture. Healing this light for 3 days until that t is hard enough to cut. Once the soaps are strong, you have to heal the SOAP for a 3 weeks until you can use it practically.

The hot process is a modified method of hand SOAP. Process of cold, this requires heating of ingredients. Both oil and water from laundry must be heated before and after adding them. Continuous agitation mix the ingredients together. The additives should be added in the SOAP transferred in from mussels. The advantage is that soaps which have tempered can immediately be used.

Modification of lot of soaps, it is an interesting method of soap making. You to grate old know you want to recycle. Add water to dissolve SOAP made previously. Melt the mixture of water and SOAP, until it becomes liquid. Dyes and other additives to go in the melted mixture. Once they were tempered in mussels, it's time that you can actually use SOAP.

We all use soaps whenever take us a bath. It will really be very exciting if we can actually use a new type of SOAP each time. With SOAP as a hobby, you are allowed to be very creative. It is indeed a great hobby to participate, you can try and see how useful it is.

Jen Hopkins has worked in the industry of care of the skin for years. It maintains sites on the melt and for SOAP-makingand soap making instructions. If you want to communicate with it, you can use the form to one of its sites.

Soap Making for Beginners -- Melt and Pour

Soap making has been around for ages. The process of making soaps can either be simple or complex, depending on what you want to make. You can make soaps as a way to make money or you can make soaps for personal use or as gifts.

Keep in mind that soap making can be dangerous, as soaps become very hot when melted during the melt and pour soap making process. Soap making should be fun and entertaining, but it is also important to practice all necessary safety precautions when making soaps.

Always wear rubber gloves and eye protection. It is also a good idea to keep your safety equipment on at all times even after you have removed the soap from the mold. This is because melted soap takes a long time to cool.

To start making soaps, you have to get to know the basic ingredients in handmade soaps. Handmade soaps are generally made from glycerin. You can buy glycerin soap at your local hobby store. There are many types of glycerin soaps that you can melt and pour into your own handmade soaps. They also have different properties and benefits for your skin.

Here are some examples of glycerin soap:

* Hemp Glycerin Soap

* Olive Oil Soap

* Clear Glycerin Soap

* Goat Milk Glycerin Soap

The good thing about the melt and pour soap making method is that all the equipments you need can be found in your own house. You can use either your double broiler or your microwave oven for melting soaps.

It is important to remember to keep the bowl containing the soap base covered when using the microwave. This is to prevent the melted soap base from splattering out of the bowl in the microwave oven and to keep the excess moisture from evaporating.

When using the microwave, melt the soap base for one minute in high temperature, stirring in the remaining unmelted soap pieces until those have melted too.

If you prefer to use the double broiler, you should first bring the water to a boil then add your soap base of choice to the boiling water, cover the pot and set the fire on low. Keep in mind that this method will take some time. The soap base may take as long as 10 minutes to melt. Stirring occasionally will also ensure an even melt.

You can also add some optional ingredients:

* You can add fragrance to your soaps. You can buy your choice of fragrance oil in your local hobby store. Keep in mind that the fragrance oil should be completely mixed in so that the soap will not have a cloudy appearance.

* You can also add your color preference when making soaps. You can use mica or food coloring for it. When using food coloring, you should start by adding one drop at a time and mixing it thoroughly until you reach your color preference.

After the soap base has melted, pour it into individual molds, tray molds, or blocks, which can then be sliced. You can also be creative and design your own soap mold to create soaps of various shapes and sizes.

Creating your own handmade soap by the melt and pour soap making process can be fun and an inexpensive process. It also makes great gifts for family and friends.

For more on Soap Making visit Susan's sites Soap Making Supply and Soap Making Recipe, and also at Shopping and Society [http://www.shopping-and-society-hub.info].

Recipe for easy soap making

A technique of manufacture is easy soap making use of SOAP remains. Generally what with the remains of SOAP in your bathroom? Some would just throw SOAP remnants or let melt in the SOAP dish while others would try to use the SOAP scrap until they crumble and fall into the sink. Well now, you can save this SOAP remains in a container and use later to make your own homemade SOAP.

It is easy and convenient with ingredients and kitchen equipment daily to make your own SOAP SOAP remains. Here's the basic recipe for making your own SOAP:

Equipment:

Mixer
Cookie molds or cookie press
Mixing bowl
Kitchen knife
Measuring cups and spoons
Ingredients:

SOAP half cup crumbs of 1 to 2 tbsp vegetable oil
1 to 2 tbsp boiling water
1 tsp flavour (cinnamon, lemon, vanilla, ginger, etc.).
foods 1 drop colouring (your desired color)
Optional ingredients:

Oatmeal half cup (ground) or

half (ground) Cup cornmeal or

half Green Tea Cup (ground)

Procedure:

1 Get your remains of SOAP or a new bar of SOAP and cut into small pieces. Put the pieces of SOAP in a blender until they turn into crumbs.

2. In a mixing bowl, mix all ingredients well. Initially use 1 tbsp vegetable oil and 1 tbsp of boiling water, but if the crumbs of SOAP are too dry, add v. 1 tablespoon each vegetable oil and boiling water.

3. Use food flavourings, such as cinnamon, vanilla, lemon or ginger, your SOAP fragrance so that it will not damage your skin. Since food flavourings are edible and then it will not cause skin irritations or reactions of the body when it is used as a fragrance. You can also use finely grated orange or lemon zest.

4. Press with cookie cutters or mussels candy to take different forms. You can attach same together two forms (ex: Star circle, or a flower of circle), or you can also shape the SOAP with your hands.

5. You can also add other ingredients to make the different varieties of SOAP.

6. Put aside for a minimum of 24 hours for SOAP harden before using it. It is preferable to leave the SOAP to harden for 2 to 3 weeks.

Here basic recipe may be doubled or tripled the amount of SOAP you want to produce. It is also a way to help the environment by recycling your SOAP remnants as a possible revenue generating endeavor.

You like to make your own SOAP by using this recipe for easy soap making ? Click the links here to learn more easy recipes for the manufacture of SOAP , you can do for your family and friends.

Cold process Soap Making - a Unique experience of craft

It is easy to learn how using the cold process SOAP, SOAP manufacturing method, once you have the basic instructions set out before you. Not only it is super simple, but it is thus an absolute blast! SOAP making skilfully combines science and art create a unique experience and craft that I'm sure you'll love.

First of all, I would like to explain the SOAP of essential cold process of the basics that everyone needs to know to create successful SOAP...

SOAP is the product of a chemical reaction called saponification. So the saponification to occur, an oil (this could be the coconut oil, castor oil, olive oil, etc.) is mixed with a base (usually soda) to form a salt. Salt created from this chemical reaction is your SOAP!

When you make SOAP mixture ingredients above zero, it is called cold process soap-making. Unlike the melting and style, this type of soap-making is the "real deal" because it does not imply a predetermined basis of fusion and adding just nutrients and dyes.

Cold process SOAP, method of manufacture is the technique I will examine today and can be accomplished with 8 easy steps:

Make sure you have all the necessary safety equipment. This should include robust rubber, glasses, thick clothing gloves and a bottle of vinegar. Lye (sodium hydroxide) is an extremely caustic chemical that can cause nasty burns if it communicates with the skin. Don't worry; As long as you use caution, you will be very well. OH and why vinegar? Believe it or not, vinegar poured on a spill of laundry will be really to neutralize the chemical product and make it harmless.

Prepare your Lye solution. When purchased, lye is usually a dry form. The water must be added to dry laundry to be used as a solvent and to allow the chemical to react with all the molecules in oils used. While is SOAP recipe probably tell you the amount of water is necessary, I recommend using a 1/3 laundry water ration. Never pour water directly in the laundry, but gently laundry water. Keep in mind that the reaction of water and soda will result in your solution to heat up to more then 200 degrees Fahrenheit!


Measure the appropriate amount of fats and oils. Your recipe is cold process SOAP will tell you exactly how to use. This measure should be relatively accurate as too little fats and oils will give place to the left over laundry and one extremely caustic SOAP while too fat and oils will lead to a very soft finished product.

Pour the mixture of oils and fats of the laundry solution and mix vigorously. Before go you to this combination, make sure you that both the lye and fats and oils are around the same temperature of 80 degrees Fahrenheit. It takes some patience as your laundry will have to cool off considerably. How heat you your fats and oils to reach 80 degrees? Well, they usually will be already hot as some of the fats or oils probably needed to be melted to the liquid form in step 3. If this was not the case then you can insert the jar hold your ingredients in a skink full of hot water to increase the temperature. If available, you can alternatively use a double boiler or microwave for the same purpose.

Keep stirring in a pattern of eight figure with your wooden spoon until the trace occurs. Trace is a sign that saponification has begun to take place. You can easily tell when you are at this stage by rain a small amount of your SOAP of early stage of your spoon on the surface of the liquid. If Parfait SOAP seems to remain on the surface for a second short before sinking in the rest of the mixture, trace occurred and you are ready to move forward.

Pour your SOAP into a mould and insulate well with old towels. It is extremely important for the stage of hardening heat escapes as slowly as possible.

After the SOAP is quite difficult to slice (this usually takes a few weeks) cut into bars of traditional SOAP and set on a rack of cookie remedy additional to an another 6 to 8 weeks.

Test your know to ensure that it is safe to use PH levels. If all the checks, your last step is to take advantage of your new creation!

As you can see, cold process soap-making is a fun and craft unique. Just try! You regret explore this art.

A cold process soap-making more detailed tutorial, please visit site http://www.soap-making-resource.com/ through this resource of Steve, you will learn everything there is to know about all aspects of manufacturing, including equipment and ingredient profiles, reviews of soaps. Feel free to ask me questions you may have relating to the manufacture of SOAP at home using the form "contact me" located on my site.

Melt and for the manufacture of SOAP - easy SOAP, method of manufacture

When I turn on the creation of something and I did know that there is a simple way and a hard way, the chances are that I'll take the easy road. It is not because I'm lazy or something but it s because the time is difficult to come and therefore there is a faster route, I do. Take me and my love for the manufacture of soaps. I like SOAP home but waiting on it to cure is torture. Once it is dry, I want to use, pure and simple. Fortunately the melting and soap-making, I can. No longer have to wait three weeks on it for cure and no more walking by my beautiful bars of SOAP wishing that I could use one.

SOAP cast and to make the method is that which is now loved by many. It is neither a hot or cold process SOAP, but that you simply melt, mold and use. It's great. If you are one who tries to stay truly organic as possible, organic iron and soap-making forms is that you can try. The process is quite simple.

To be with melting and soap-making, you need only a few things. The base (which can be purchased at any craft store), certain colors or fragrance if you want, a pot for the stove with a flat glass and mould measurement. Rather simple huh? Not having to worry about laundry and burning yourself, without gloves and safety goggles (unless you like simply their) did and no smelly chemical reaction of the laundry. It's great.

Now that you have all together you need iron and soap-making to make the base and the cube, placing the cubes in the glass container. Once all the cubes, place the container glass within the jar that is about half full of water. Turn on the stove to begin to heat water, keeping just below the boiling point. When you see that the entire basis of SOAP melted you can remove the container glass pot and add perfume you want. If the perfumes are not something that you like then Don't worry about it. But I do not like fragrances and if I try to add a few drops of my favorite oil equivalent environ.25 ounce kilo of SOAP base. If you like more or less then you can play with what you want but this is just my general rule of gold.

With your SOAP now still a liquid and feel good, you can add colors. You can use the regular food colouring but keep in mind that if you use too much it can stain your skin or towels. Not a good thing. There are several types of staining available for soaps that do not stain anything and are relatively cheap. You on and eighth for a quarter teaspoon added to a book of base. If a little will go far.

Now that you have added all your melting and the SOAP making process is almost complete. All that remains is for. Find a mold of your choice and simply for the liquid inside. A few hours the SOAP will be hard and ready to use. If you are going to be removed from its mould and it does move, run it simply as a little water and it should pop right off.

Meryl Bliss was in the SOAP making business for more than 15 years and is an expert in the manufacture of SOAP. For more information about SOAP, manufacturing method and read some of unique and original of Meryl revenue, click here to visit its Web site: http://www.thesoapmakingsite.com