SOAP-making technique

It is on the process of cold soap-making.

SOAP, equipment manufacturing

To safely House soap, it is essential that the specific proportions of the ingredients of SOAP are scrupulously followed.

It is strongly recommended to use specialised software to calculate the proportions for each ingredient, and run it every time a new recipe is tested. There are many types of software for this purpose. There are even iPhones apps.

Some basic equipment must be used in the preparation of SOAP and soap-making ingredients:

-an exact scale.

-a rapid read thermometer says;

-some small cups to measure; a stick Blender to mix oils with the mixture of laundry and start the process of saponification;

- and moulds of soap.

Here is an example of the proportions for various soap ingredients:

-450 grams of vegetable fats;

-170 millilitres of water

-60 grams of caustic soda

SOAP making

Preparation of the ingredients in SOAP

Manufacture of SOAP requires that water, caustic alkali and fats or oils.

It is very important that caustic soda is gently poured water and never otherwise which will cause a kind of explosion and splash produces corrosive on your body. Naturally, the temperature of the mixture of water and soda rises up to about 190 ° F, or 90 ° c.

Therefore a (Pyrex) glass or stainless steel container must be used. Do not use a container in plastic as it would be melting due to the high temperature. Don't forget that aluminium is undermined by the soda. Always use wooden spoons to incorporate soda.

Mix the ingredients in SOAP

Temperature of baking soda must fall to 95-105 ° F (35-40 ° C) and the oil must be heated to 130 ° F (55 ° C). After checking these temperatures with a specific rapid read thermometer, slowly pour and caustic soda in the heated oil. Once the two ingredients are mixed, you can use a stick Blender to mix the oil with the mixture of laundry. Stirring the mixture of lye-water-oil with the stick Blender, you enable mixer short bursts. Mix for 3 to 5 seconds and then incorporate the most.

Once you start using the stick Blender, you can see oil goes cloudy and the mixture of SOAP are starting to come together. Keep the mixture in short bursts until the oil and water of laundry are completely mixed. This should not take more than 30 to 40 seconds.

Now you are almost the scene called "trace". Using the stick mixer allows to trace in under a minute, while if you use a wood or plastic spoon must be 10 75 minutes for the same result.

Secret successful SOAP manufacturing

Trace is the term to describe the consistency or the thickness and the scene where the mixture of hand SOAP is ready to be paid in mussels. Tracing is easy to recognize. Using a plastic spatula, drizzle a small amount in the top of the soap mixture. If a mark or trail remains for a few seconds before disappearing once more, your SOAP has traced. The mixture should have the consistency of pudding or liquid honey.

Your personal touch in your soap home

Now is the right time for you can add your own additives (essential oils, honey, milk, etc.) before pouring the mixture in mussels SOAP, you may already be lubricated with petroleum jelly.

You can now cover the mould with a cloth and allow to stand for 24 to 36 hours to get hold of the SOAP. In effect, saponification lasts at least 24 hours and, during this period, the SOAP is corrosive. You must be especially careful to keep the children away from her during this period of time.

After manufacturing of SOAP

After that, you can take the SOAP out of the mould and rinse to remove any excess of laundry.

However, soaps are still quite soft, and you need to allocate approximately 6 weeks to be completely dry and hard.

Example of SOAP recipe

Various SOAP recipes are found on websites on soap. For example, here is a very simple recipe:

-450 g of coconut oil;

-700 grams of olive oil;

-450 grams of vegetable fats;

-600 millilitres of water.

-223 grams of caustic soda.

I couldn't believe it when my wife told me that supposed "natural" SOAP, that I was very happy to use a staining my shower screen; and it's true! She gave me a natural hand SOAP, and it was a discovery for me. Peppermint SOAP is so sweet on my skin and so refreshing! I had never felt such a thing. This started my passion for the natural facts, hand crafted soaps. I started to research what were made soaps to and was terrified when I learned what they put in commercially produced soaps! Immediately I decided that I had the mission to inform people about the risks with soaps purchased at the supermarket and promote the natural handmade soaps. It was not a big problem for me that I was already a specific user of natural medicine with essential oils. I hope that you enjoy reading and learning the techniques of bar or liquid soap-making and start to make your own natural soap from home!
Visit my Web site at http://www.homemadesoapstore.com to learn all these different techniques.

Why I like to melt and for the manufacture of SOAP

I like to do soap using the melting and for SOAP-making process. In my experience, it is the easiest way to make your own facts to hand SOAP. A good recipe is a must if you are just starting, but once you are experienced, you can make up your own recipes and get really creative. What a SOAP Double Chocolate Brownie?

Melt and pour soap comes in soap blocks, ready to melt and pour into the mould of your choice.
But the exciting part is once you have melted the SOAP block. Then you can add your own choice of coloring additives, perfumes and pleasure of SOAP; for example, oatmeal, flower petals or herbs.

Once this is done, it is time to pay in moulds of your choice. There are some really cute SOAP molds. For example, hearts, flowers, shells, gingerbread men, and many others.

Melt and pour soap takes only a few hours to set at room temperature. If you do not want to wait a long time, you can place the mould in the refrigerator for about an hour. But never to place the mould in the freezer.

Once the SOAP was defined in the mould, it is time to unmold it. Just turn the pan upside down on a clean surface soft (therefore the SOAP chip if it comes with a rush) and SOAP should pop out. If you have difficulty getting SOAP out of the mould, run some hot water on the basis of the mold and try again.

Your hand very own SOAP is now ready to use! It is great gifts to give to your friends and family, especially if you use of mussels minions such as those mentioned above. I know that my friends are impressed, when I give them beautifully scented and colourful heart or flowers in the form of soaps and say that I made myself.

Therefore pleasure to make your own iron and remit of SOAP. The only problem is, once you start, it is difficult to stop!

Jennifer Christine has a passion for manufacturing of Soap Super! Take your free exclusive mini report, Secret online Soap Making Supplies when you visit [http://www.][MakeYourOwnSoapToday.com] and find out how you can make your own hand made SOAP today!

Discover how fun Soap Making is for you!

Looking for a new hobby to keep you busy? There are several options you can try, but the manufacture of SOAP is very interesting. Imagine using SOAP you have your own customized. Who would not be a good idea? Instead of using the old, boring white SOAP bar you use, you can now have all the days of different soaps.

People are very well in this because it allows to be very creative. There are different ways to actually make soaps. It all depends on how you want to make your SOAP. There are the melting method and pay, hot processes, processes of cold and the SOAP making process handmilled.

If you plan to start now to this activity, the first things you need to know are the substances that are used to manufacture these soaps. Soaps are mainly made of mixture of oils and fats. This is called the saponification process. You can use the fats of animals or even vegetable. Other ingredients also include color, essential oils and dyes. Just mix everything to obtain ideal SOAP that you want to.

If are trying to SOAP for the first time, you can start with the melt and method. It is a simple process because everything is ready for you. You just have to melt the base SOAP to make liquid soap. The next step is the addition of additives to modify your SOAP. Pour soap in mussels and let harden. This is how it is easy.

Cold soap-making process is probably a no-hassle method that you can try. First of all, it is important to mix the laundry with water. Once that this is done, add the fat in the mix until it forms an emulsion. Additives to go in the next, so add whatever you want in the mixture. Healing this light for 3 days until that t is hard enough to cut. Once the soaps are strong, you have to heal the SOAP for a 3 weeks until you can use it practically.

The hot process is a modified method of hand SOAP. Process of cold, this requires heating of ingredients. Both oil and water from laundry must be heated before and after adding them. Continuous agitation mix the ingredients together. The additives should be added in the SOAP transferred in from mussels. The advantage is that soaps which have tempered can immediately be used.

Modification of lot of soaps, it is an interesting method of soap making. You to grate old know you want to recycle. Add water to dissolve SOAP made previously. Melt the mixture of water and SOAP, until it becomes liquid. Dyes and other additives to go in the melted mixture. Once they were tempered in mussels, it's time that you can actually use SOAP.

We all use soaps whenever take us a bath. It will really be very exciting if we can actually use a new type of SOAP each time. With SOAP as a hobby, you are allowed to be very creative. It is indeed a great hobby to participate, you can try and see how useful it is.

Jen Hopkins has worked in the industry of care of the skin for years. It maintains sites on the melt and for SOAP-makingand soap making instructions. If you want to communicate with it, you can use the form to one of its sites.

Soap Making for Beginners -- Melt and Pour

Soap making has been around for ages. The process of making soaps can either be simple or complex, depending on what you want to make. You can make soaps as a way to make money or you can make soaps for personal use or as gifts.

Keep in mind that soap making can be dangerous, as soaps become very hot when melted during the melt and pour soap making process. Soap making should be fun and entertaining, but it is also important to practice all necessary safety precautions when making soaps.

Always wear rubber gloves and eye protection. It is also a good idea to keep your safety equipment on at all times even after you have removed the soap from the mold. This is because melted soap takes a long time to cool.

To start making soaps, you have to get to know the basic ingredients in handmade soaps. Handmade soaps are generally made from glycerin. You can buy glycerin soap at your local hobby store. There are many types of glycerin soaps that you can melt and pour into your own handmade soaps. They also have different properties and benefits for your skin.

Here are some examples of glycerin soap:

* Hemp Glycerin Soap

* Olive Oil Soap

* Clear Glycerin Soap

* Goat Milk Glycerin Soap

The good thing about the melt and pour soap making method is that all the equipments you need can be found in your own house. You can use either your double broiler or your microwave oven for melting soaps.

It is important to remember to keep the bowl containing the soap base covered when using the microwave. This is to prevent the melted soap base from splattering out of the bowl in the microwave oven and to keep the excess moisture from evaporating.

When using the microwave, melt the soap base for one minute in high temperature, stirring in the remaining unmelted soap pieces until those have melted too.

If you prefer to use the double broiler, you should first bring the water to a boil then add your soap base of choice to the boiling water, cover the pot and set the fire on low. Keep in mind that this method will take some time. The soap base may take as long as 10 minutes to melt. Stirring occasionally will also ensure an even melt.

You can also add some optional ingredients:

* You can add fragrance to your soaps. You can buy your choice of fragrance oil in your local hobby store. Keep in mind that the fragrance oil should be completely mixed in so that the soap will not have a cloudy appearance.

* You can also add your color preference when making soaps. You can use mica or food coloring for it. When using food coloring, you should start by adding one drop at a time and mixing it thoroughly until you reach your color preference.

After the soap base has melted, pour it into individual molds, tray molds, or blocks, which can then be sliced. You can also be creative and design your own soap mold to create soaps of various shapes and sizes.

Creating your own handmade soap by the melt and pour soap making process can be fun and an inexpensive process. It also makes great gifts for family and friends.

For more on Soap Making visit Susan's sites Soap Making Supply and Soap Making Recipe, and also at Shopping and Society [http://www.shopping-and-society-hub.info].

Recipe for easy soap making

A technique of manufacture is easy soap making use of SOAP remains. Generally what with the remains of SOAP in your bathroom? Some would just throw SOAP remnants or let melt in the SOAP dish while others would try to use the SOAP scrap until they crumble and fall into the sink. Well now, you can save this SOAP remains in a container and use later to make your own homemade SOAP.

It is easy and convenient with ingredients and kitchen equipment daily to make your own SOAP SOAP remains. Here's the basic recipe for making your own SOAP:

Equipment:

Mixer
Cookie molds or cookie press
Mixing bowl
Kitchen knife
Measuring cups and spoons
Ingredients:

SOAP half cup crumbs of 1 to 2 tbsp vegetable oil
1 to 2 tbsp boiling water
1 tsp flavour (cinnamon, lemon, vanilla, ginger, etc.).
foods 1 drop colouring (your desired color)
Optional ingredients:

Oatmeal half cup (ground) or

half (ground) Cup cornmeal or

half Green Tea Cup (ground)

Procedure:

1 Get your remains of SOAP or a new bar of SOAP and cut into small pieces. Put the pieces of SOAP in a blender until they turn into crumbs.

2. In a mixing bowl, mix all ingredients well. Initially use 1 tbsp vegetable oil and 1 tbsp of boiling water, but if the crumbs of SOAP are too dry, add v. 1 tablespoon each vegetable oil and boiling water.

3. Use food flavourings, such as cinnamon, vanilla, lemon or ginger, your SOAP fragrance so that it will not damage your skin. Since food flavourings are edible and then it will not cause skin irritations or reactions of the body when it is used as a fragrance. You can also use finely grated orange or lemon zest.

4. Press with cookie cutters or mussels candy to take different forms. You can attach same together two forms (ex: Star circle, or a flower of circle), or you can also shape the SOAP with your hands.

5. You can also add other ingredients to make the different varieties of SOAP.

6. Put aside for a minimum of 24 hours for SOAP harden before using it. It is preferable to leave the SOAP to harden for 2 to 3 weeks.

Here basic recipe may be doubled or tripled the amount of SOAP you want to produce. It is also a way to help the environment by recycling your SOAP remnants as a possible revenue generating endeavor.

You like to make your own SOAP by using this recipe for easy soap making ? Click the links here to learn more easy recipes for the manufacture of SOAP , you can do for your family and friends.

Cold process Soap Making - a Unique experience of craft

It is easy to learn how using the cold process SOAP, SOAP manufacturing method, once you have the basic instructions set out before you. Not only it is super simple, but it is thus an absolute blast! SOAP making skilfully combines science and art create a unique experience and craft that I'm sure you'll love.

First of all, I would like to explain the SOAP of essential cold process of the basics that everyone needs to know to create successful SOAP...

SOAP is the product of a chemical reaction called saponification. So the saponification to occur, an oil (this could be the coconut oil, castor oil, olive oil, etc.) is mixed with a base (usually soda) to form a salt. Salt created from this chemical reaction is your SOAP!

When you make SOAP mixture ingredients above zero, it is called cold process soap-making. Unlike the melting and style, this type of soap-making is the "real deal" because it does not imply a predetermined basis of fusion and adding just nutrients and dyes.

Cold process SOAP, method of manufacture is the technique I will examine today and can be accomplished with 8 easy steps:

Make sure you have all the necessary safety equipment. This should include robust rubber, glasses, thick clothing gloves and a bottle of vinegar. Lye (sodium hydroxide) is an extremely caustic chemical that can cause nasty burns if it communicates with the skin. Don't worry; As long as you use caution, you will be very well. OH and why vinegar? Believe it or not, vinegar poured on a spill of laundry will be really to neutralize the chemical product and make it harmless.

Prepare your Lye solution. When purchased, lye is usually a dry form. The water must be added to dry laundry to be used as a solvent and to allow the chemical to react with all the molecules in oils used. While is SOAP recipe probably tell you the amount of water is necessary, I recommend using a 1/3 laundry water ration. Never pour water directly in the laundry, but gently laundry water. Keep in mind that the reaction of water and soda will result in your solution to heat up to more then 200 degrees Fahrenheit!


Measure the appropriate amount of fats and oils. Your recipe is cold process SOAP will tell you exactly how to use. This measure should be relatively accurate as too little fats and oils will give place to the left over laundry and one extremely caustic SOAP while too fat and oils will lead to a very soft finished product.

Pour the mixture of oils and fats of the laundry solution and mix vigorously. Before go you to this combination, make sure you that both the lye and fats and oils are around the same temperature of 80 degrees Fahrenheit. It takes some patience as your laundry will have to cool off considerably. How heat you your fats and oils to reach 80 degrees? Well, they usually will be already hot as some of the fats or oils probably needed to be melted to the liquid form in step 3. If this was not the case then you can insert the jar hold your ingredients in a skink full of hot water to increase the temperature. If available, you can alternatively use a double boiler or microwave for the same purpose.

Keep stirring in a pattern of eight figure with your wooden spoon until the trace occurs. Trace is a sign that saponification has begun to take place. You can easily tell when you are at this stage by rain a small amount of your SOAP of early stage of your spoon on the surface of the liquid. If Parfait SOAP seems to remain on the surface for a second short before sinking in the rest of the mixture, trace occurred and you are ready to move forward.

Pour your SOAP into a mould and insulate well with old towels. It is extremely important for the stage of hardening heat escapes as slowly as possible.

After the SOAP is quite difficult to slice (this usually takes a few weeks) cut into bars of traditional SOAP and set on a rack of cookie remedy additional to an another 6 to 8 weeks.

Test your know to ensure that it is safe to use PH levels. If all the checks, your last step is to take advantage of your new creation!

As you can see, cold process soap-making is a fun and craft unique. Just try! You regret explore this art.

A cold process soap-making more detailed tutorial, please visit site http://www.soap-making-resource.com/ through this resource of Steve, you will learn everything there is to know about all aspects of manufacturing, including equipment and ingredient profiles, reviews of soaps. Feel free to ask me questions you may have relating to the manufacture of SOAP at home using the form "contact me" located on my site.

Melt and for the manufacture of SOAP - easy SOAP, method of manufacture

When I turn on the creation of something and I did know that there is a simple way and a hard way, the chances are that I'll take the easy road. It is not because I'm lazy or something but it s because the time is difficult to come and therefore there is a faster route, I do. Take me and my love for the manufacture of soaps. I like SOAP home but waiting on it to cure is torture. Once it is dry, I want to use, pure and simple. Fortunately the melting and soap-making, I can. No longer have to wait three weeks on it for cure and no more walking by my beautiful bars of SOAP wishing that I could use one.

SOAP cast and to make the method is that which is now loved by many. It is neither a hot or cold process SOAP, but that you simply melt, mold and use. It's great. If you are one who tries to stay truly organic as possible, organic iron and soap-making forms is that you can try. The process is quite simple.

To be with melting and soap-making, you need only a few things. The base (which can be purchased at any craft store), certain colors or fragrance if you want, a pot for the stove with a flat glass and mould measurement. Rather simple huh? Not having to worry about laundry and burning yourself, without gloves and safety goggles (unless you like simply their) did and no smelly chemical reaction of the laundry. It's great.

Now that you have all together you need iron and soap-making to make the base and the cube, placing the cubes in the glass container. Once all the cubes, place the container glass within the jar that is about half full of water. Turn on the stove to begin to heat water, keeping just below the boiling point. When you see that the entire basis of SOAP melted you can remove the container glass pot and add perfume you want. If the perfumes are not something that you like then Don't worry about it. But I do not like fragrances and if I try to add a few drops of my favorite oil equivalent environ.25 ounce kilo of SOAP base. If you like more or less then you can play with what you want but this is just my general rule of gold.

With your SOAP now still a liquid and feel good, you can add colors. You can use the regular food colouring but keep in mind that if you use too much it can stain your skin or towels. Not a good thing. There are several types of staining available for soaps that do not stain anything and are relatively cheap. You on and eighth for a quarter teaspoon added to a book of base. If a little will go far.

Now that you have added all your melting and the SOAP making process is almost complete. All that remains is for. Find a mold of your choice and simply for the liquid inside. A few hours the SOAP will be hard and ready to use. If you are going to be removed from its mould and it does move, run it simply as a little water and it should pop right off.

Meryl Bliss was in the SOAP making business for more than 15 years and is an expert in the manufacture of SOAP. For more information about SOAP, manufacturing method and read some of unique and original of Meryl revenue, click here to visit its Web site: http://www.thesoapmakingsite.com

The Benefits of Learning How to Make Soap at Home

Si vous trouvez qu'il n'y a aucune savons commerciales sur le marché pour répondre à vos besoins, vous pourriez envisager de faire votre propre savon à la maison au lieu de cela. Savon maison naturelle donne non seulement le sentiment de fierté que vous obtenez de créer quelque chose de vos propres mains, mais il peut être préférable pour votre peau.

Un des avantages de la fabrication de savon maison est que dans le processus, les humectants, comme la glycérine, restent dans le savon, attirant l'humidité de la peau. Sociétés de beauté comme extraire la glycérine parce qu'ils peuvent commercialiser séparément. Elle laisse le consommateur avec une peau propre mais sec. Quand vous apprenez comment faire de savon à la maison, vous contrôlez le processus et vous n'avez pas à vous soucier de manipulations de l'entreprise.

Si vous utilisez une méthode appropriée pour comment faire de savon, vous pouvez raser le coût d'achat magasin cher savons que font la même chose. Il y a beaucoup de savon facile, rendant les projets là-bas et une fois que vous obtenez le blocage de celui-ci, vous n'a probablement jamais devra boutique du savon à nouveau.

En plus d'économiser de l'argent, vos savons maison peuvent être grande cadeaux pour donner aux parents et amis. Ou vous pouvez avoir une partie de savon où vous enseignez vos amis et votre famille comment faire savon afin qu'ils puissent concevoir et créer leurs propres barres de savon individuels. Le processus n'est pas recommandé pour enseigner aux enfants, toutefois, car il existe des acides impliqués qui pourraient être nocives.

Savon a de nombreux processus au choix, mais la plupart de ces processus ont les mêmes ingrédients principaux : Lye, les graisses animales et les huiles. Saponification est le processus qui fait et lye sont jointes ensemble pour créer le savon. N'oubliez pas que la lessive est caustique et que vous avez besoin de porter des gants et des lunettes de protection lors de la manipulation.

Dans une boutique d'artisanat, vous pouvez même acheter un savon rendant trousse qui auront tout ce que vous avez besoin pour démarrer : recettes, huiles, lye et un moule à façonner votre savon. Une fois que vous obtenez plus à l'aise avec le processus vous pouvez étendre votre façon de penser à l'extérieur de la trousse, peut-être en utilisant différentes huiles et en jouant avec des formes.

Vous trouverez peut-être que pour revenir à la nature est exactement ce qui a besoin de votre peau et vous n'avez pas à acheter des produits organiques chers à le faire si vous savez comment faire vos propres. Faire votre propre savon peut être bénéfique pour le reste de votre famille, surtout si quelqu'un est allergique ou a la peau sensible. Beaucoup de savons commerciaux sont parfumés et réellement irritent la peau et provoquent des réactions allergiques.

Fabrication de savon est un projet de grand art créatif où vous pouvez réellement produire quelque chose que vous pouvez utiliser autour de la maison. Vous trouverez peut-être même que votre maison savon naturel est meilleure pour votre peau que d'autres produits fin commerciales, élevés que vous avez essayé car rien bénéfique est supprimée lorsque vous avez le contrôle du processus. N'oubliez pas, votre plus grande limite est votre imagination.

Jen Hopkins a travaillé dans l'industrie des soins de la peau pour les années. Elle soutient les sites sur comment rendre savonet rendre la maison soap. Si vous souhaitez communiquer avec elle, vous pouvez utiliser le formulaire de contact à l'un de ses sites.

Information and methods for manufacturing of SOAP

The soap is a surfactant used in conjunction with water for washing and cleaning, which traditionally comes either in solid bars or in the form of a thick liquid. SOAP consists of sodium or potassium salts of fatty acids and is gained by reacting common oils or fats with a strong alkaline solution in a process known as saponification. The fats are hydrolyzed by the base, docile alkali salts of fatty acids and glycerol. The most accepted soap making process today is the cold process method, where fats such as olive oil react with lye, whereas some soapers use the historical hot process.

To initiate soap making, you will feel like all your soap into the small specks grating. Then place all your flakes into the glass bowl that can be furthermore placed in the double boiler; and as double boiler heats up, all you will want is to combine your shredded soap piece. Put some vegetable oils and scents at this end, making it certain that all things are also integrated. Crack up the soap clomps that have figure and persist to heat pending the soap enter the string phase, and at this point in time, the soap will even solidify quickly. Remove the pot from the heat resource as it rapidly append in the fragrances, coloring, herbs, and elective items in meticulous order; and ladling into the molds also lets it to cure.

There is a lot of soap making procedures out there that can help you create soap. The first method for soap making is known as the cold process soap making where it requires materials such as the pot made from stainless steel that is large enough, the rubber gloves, the kitchen thermometers, the lye, scale, mold, the measuring cups, cardboard, coconut oil olive oil, plastic bags, fragrances, and distilled water. The cold procedure is named from the common low level temperatures that are exploited to grind this sort of soap.

The art or hobby of making soap needs a soap maker to have the proper materials for their craft. Molds for soap making and other supplies can simply be found in different places, as long as you know what it is you're looking for. In fact, a lot of new soap makers uncover that they don' t really need to purchase anything new in order to start their hobby. Making soap recipe with no use of lye completely is not viable so it's completely your desire to use lye in your soap production process or you feel like trying your hands in Glycerin based soaps.

By enclosing soap scraps, you can utilize this hand milled soap creation method, which is called the soap re-batching which you would like modifying into new tavern of the soap. For this, you will need a grater, the mold, soap scraps, dyes, fragrance, and other additives. The best kind of method for this type of soap making is the cold process.

Jen Hopkins has worked in the skin care industry for years. She maintains websites about how to make soap at home, and soap making process. If you want to contact her, you can use the contact form at one of her sites.

Organic Soap Making Supplies and Materials

In any soap making activity like organic soap making, the first thing you need to know before you start making your soap is what supplies or ingredients you need to have on hand. The supplies you will need to prepare will depend on the type of soap you are going to make. For making organic soap, you will need to prepare the following supplies: 

Soap Base. A soap base makes soap making fast and easy. It is very handy and is usually used in the melt and pour process of soap making.   Just like raw soap, a soap base contains essential oils, oil fragrances and colorants. Soap bases come in different varieties such as glycerine, castile, goat milk, shea butter, cocoa butter and specialty bases like olive oil, honey and oatmeal. Soap bases also come in two forms: soap base bars and shredded soap base. 

Lye. Lye is also known as Caustic Soda. It is used in cold process soap making where water and lard or fats are added to it. Lye comes in solid dry form such as flakes, pellets, powder, beads and in solution form and dissolved in water. Lye is a corrosive chemical and can cause burns and injury to the skin and blindness if it reaches the eyes.

Carrier Oil. Carrier oil is also known as vegetable oil or base oil. It is used to dilute the essential oils and help these oils to get into the skin. Most carrier oils come from pressed vegetables, fruit seeds or nuts such as olive oil, grape seed oil, sunflower seed, avocado, canola (rapeseed), sesame, jojoba, sweet almond, pecan, walnut and macadamia.

Essential Oils or Fragrance. Essential oils are also known as volatile or ethereal oils. They are extracted from plants and are extracted for their aroma or fragrance. They are used in combination with carrier oils to add fragrance to your organic soaps. Essential oils are extracted from various parts of plants: 

·         Seeds - almond, anise, cumin, nutmeg

·         Flowers  - lavender, rose, ylang-ylang, chamomile, sage, geranium

·         Leaves - basil, cinnamon, eucalyptus, lemon grass, peppermint

·         Peel - orange, lemon, lime, grapefruit

·         Wood - cedar, sandalwood, camphor 

Natural Ingredients. Natural ingredients are extracts or ingredients added to a soap base mixture to give the soap a unique and distinctive characteristic. There are several varieties of natural ingredients that can be used in soaps for different purposes as: 

Exfoliants - oatmeal, poppy seeds, sugar, salt, corn meal
Cleansing - grapefruit seed extract, milk
Relaxant - honey, lavender, rosemary
Moisturizer - shea butter, wheat germ, aloe vera, cocoa butter 


Molds. Molds are the containers wherein the soap mixture is poured on and left to harden and take shape. Soap molds come in a variety of shapes, sizes and materials. There are also novelty soaps for special occasions and you can have molds customized for specific needs.

Colorants.  Colorants are used to give color to your soap. Food coloring can be used as colorant.  Pigments and micas come in different colors. There are also earth tone metallic micas and glitters that can make add intensity to your soap and make it visually attractive.

Equipments. Equipments such as stainless steel pots or pans, double boiler pans, mixing bowls, miller or blender, and a stove or microwave are some of the equipments you will need in making your organic soap.

Utensils and safety equipments. You will also need goggles and rubber gloves for safely handling the hazardous substances such as lye. A weighing scale to measure your ingredients, plastic or stainless steel spoons for mixing, thermometer, pitcher, aprons and pot holders. 

The above enumerated supplies are also basic requirements for making natural, herbal soaps and other kinds of soap.

Do you want to learn more about organic soap making and the supplies and materials you need for this project? For more organic soap making tips and recipes, click on the links here.

Learn how to make SOAP, at home, with a master SOAP manufacturer

You can learn how to make SOAP. More commercial skin care products contain harsh ingredients, chemically manufactured, which can contribute to a variety of skin problems, including: dry skin, dry itching, dry scaly skin, oily skin, acne, skin allergies, inflammation, redness, swelling, rash, and more. This is why so many people have decided to take matters into their own hands and learn how to make SOAP. The best care product skin of homemade, for a variety of skin problems, is natural goat milk SOAP. Why?

Goat milk SOAP contains light and fresh, healthy, nutritious and natural ingredients. It contains natural vitamins A, B, C, D, E and k. Due to moisture, attracting properties of milk, medium chain fatty acids beneficial abundant in the milk and the combination of skin nourishing oils of compliment it, goat milk SOAP is a natural moisturizer. Goat milk provides anti-aging properties in helping the regeneration of collagen in the skin.

Goat's milk is a buffer which leaves very close skin of its natural pH level. After the use of commercial skin care products, skin takes, on average, about two hours to restore the correct pH level. This is why the tight sensation, itching, so that many people experience after the bath. Natural goat milk SOAP is extremely light and mild, cleans carefully and leaves no oily after effects.

There are different methods to make goat SOAP milk including: process of cold of soap soap making, hot manufacturing and re-batching. Before you begin, you need to know the appropriate materials, ingredients and safety procedures to use. A good idea would be to find a master SOAP manufacturer who can guide you with easy instructions, step by step. There are different possibilities available for you.

Some monitors offer in person classes and, there is also, step by step instructions are in a DVD for the manufacture of SOAP. If you are a beginner or a veteran, you have to learn how to make SOAP from a well-known, experienced master, manufacturer of SOAP. For all the people who would like to learn, but may prefer a pas make in the classes of the person, or which would be just to learn at home, in the privacy of their very own kitchen, a master SOAP manufacturer can come to you through DVD, step by step, to teaching!

You can learn them SOAP cold process, hot process SOAP re-batch and goats milk SOAP manufacturing processes! You will, in addition, receive SOAP making recipes, a calculator manual lye and find an abundance of resources for materials and supplies for the manufacture of soaps! You will receive even a discount on a SOAP starter kit with the purchase of this DVD to make! You have SOAP, make the information that you will ever need, right at your fingertips.

Whether you are beginner or veteran, there are ways to improve and advance your soap making skills. Many people become very successful in their own business with the help of a master SOAP manufacturer! You can learn how to make and enjoy the benefits of goat milk SOAP, while becoming a very successful SOAP maker too!

To learn how to make SOAP at home, with a master SOAP manufacturer go to: http://www.natural-goat-milk-soap.com/how-to-make-soap.html

A New Hobby to Try - Soap Making

An interesting and useful hobby which everyone can try is soap making. Soap is used to wash our hands when we get dirty, or wash our bodies whenever we take a shower. Other uses can be for washing clothes or dishes. In general, it is mainly used for washing things. But soap can also be used as an ornament in the bathroom, kitchen or even bedroom. A beautifully made and crafted soap can be a great addition to any room you desire, or it can simply make bath time a lot more fun.

Some ingredients that you will need as a beginner are lye and some fats. The basic properties of the soap that you are going to make will depend on the type of oil that you use. Using coconut oil will produce soap that makes a good amount of lather. Vegetables oils will produce soap that is soft while olive oils make soap that is much milder than using other vegetable oils. Lye on the other hand, is used to hydrolyze the oils to yield fatty acids and glycerol.

Soap making can be done through the cold process or the hot process. Both are relatively simple to do and once you are done, the pre-formed soap will be ready for you to design in whatever way you want. For the hot process, mix lye and water while heating the fat in a separate container. Add the lye water to the fat and continue heating for two hours until your soap is ready. The cold process is almost the same, without having to heat the fat. Just add the fat to lye water and mix until cool. This can then be poured into molds depending on what shape you like.

Once your soap mixture is ready, you can add several things to it so that you can enhance its appeal. You can choose to add colorful dyes to obtain the color that you want your soap to be. Fragrance oils will add to the smell of the soap making it more appealing to use. With constant practice and trying out different techniques and styles, you will be able to come up with different and attractive designs for your soaps.

A precaution that you should keep in mind is that lye is a dangerous substance. It is a corrosive substance which can degrade skin upon contact. This is why protective equipment such as gloves should be used, and children should always be supervised by an adult.

Soap making is a fun hobby which can be enjoyed by everyone in the family. It is different from the usual arts and crafts that make use of wood, clay or paint. It is also useful as the finished product can be used as a display or it can be used as normal soaps in the bathroom.

Jen Hopkins has worked in the skin care industry for years. She maintains websites about liquid soap making, and natural soap making. If you want to contact her, you can use the contact form at one of her sites.

Learn the Good Stuff on the manufacture of SOAP

Soaps are considered a necessity in our homes. Since these are practically cleansing agents that we use, it is unlikely that a certain home will not have any of these. The use of these cleaning agents dates back during the ancient times which have been carried over to the present. Soaps are basically used for bathing, washing and cleaning. These cleansing agents are synthesized from animal or vegetable fats. When it comes to cleaning, soaps are very effective.

SOAP making is just a matter or mixing the raw materials in order to make the finished products. The process of making soaps is also known as saponification. This process basically involves mixing fats and oils with a certain amount of alkali. In soap making, this mixture results in the formation of salts of fatty acids. These salts capture the dirt and grease ensuring that they will be removed from the surface. As this is washed by water, the dirt and soap mixture comes with it, leaving nothing but a clean surface.

There are different kinds of soaps which are made. Besides from the commercial ones that we are used to, there are also handmade soaps. These handmade soaps are the products that you get from making the soaps from scratch. The qualities of these two soaps are very different. In fact, making it basically involves superfatting or the addition of an excess amount of fats into the soap mixture. The main advantage of this method is to make the soap skin-friendly. As the Glycerin is left untouched in the soap, it is still able to keep it moisturizing property.

There are actually different kinds of soap making processes. These are the cold process, hot process and the melt & to process. There are some advantages and disadvantages that these methods have. The cold process is done by slightly melting the mixture to liquefy it and maintain it at that temperature. The hot process of soap making involves heating the soap mixture to a higher temperature. For the melt & to process, there is a pre-made mixture which is melted and poured into the mold.

SOAP making is an easy process to do since the raw ingredients needed for this is easily accessible. You can get them in your grocery stores and even in specialty craft stores. SOAP making is actually a flexible activity to do. You can personalize the soaps that you make depending on your taste. It is up to you to add the color and the scent of the soaps. Whatever it is that you like, you can make it with your soaps.

Creativity makes soap making very fun! You can absolutely do anything that you want with your soaps. Don't get too excited when you make your soaps because there are certain precautionary measures that you should take. Lye is an essential ingredient in soap making, but it is very dangerous to handle. Always wear safety equipment when handling soap mixtures with lye to keep you safe all the time.

Jen Hopkins has worked in the skin care industry for years. She maintains websites about organic soap making, and how to make soap. If you want to contact her, you can use the contact form at one of her sites.

Manufacture of SOAP of Christmas

As Christmas is almost here, which may be a better gift than Christmas handmade on the theme of SOAP to give to family and friends?

My family and my friends always have to expect the hand made gifts of SOAP that I give them each year. Hand made SOAP is a practice and a thoughtful gift. The recipient knows that have you thought about them while you took the time to make their SOAP. And everyone uses soap! If you are short of cash, handmade SOAP may also be an economic gift (although mine look fancy and luxury).

I buy a box of a nice, inexpensive dollar store, it the line with white silk paper and nestle inside SOAP. Then I them les couvrir cover with more paper, place the lid on top and place it carefully with attractive Christmas paper. Then, I attach a charming (and nicely cheap) bow on the top and a nice gift tag.

If you are stuck for ideas on what kind of SOAP on the theme of Christmas to do so, you can always check out Lush off-or online. They have a wonderful array of bath bombs (they have all kinds of SOAP throughout the year) and which could inspire you and know about the theme of Christmas. For example, bar Bling Crosby, Candy Cane bubble Bar or Rock Star Soap bubble.

If you wanted to do a Bling Crosby style SOAP, you would need some glitter, color of SOAP and soap fragrance. Why not give your own name, eg Bling Mary if your name is Mary?

What a mould of Holly or MISTLETOE and green staining SOAP? Or pretty small star in the form of SOAP. Christmas pudding in the form of SOAP or which were stained to look like a Christmas pudding. Or men of gingerbread, with a wonderful gingerbread smell and colour, in a Mussel delicious gingerbread. Almost everything is possible in the wonderful world of soap-making!

Jennifer Christine has a passion for manufacturing of Soap Super! Take your free exclusive mini report, Secret online Soap Making Supplies when you visit www.MakeYourOwnSoapToday.com [www.][MakeYourOwnSoapToday.com] and find out how you can make your own hand made SOAP today!

Easy Steps to Making Soap

Going green and eco-friendly products are being widely promoted due to the fact that it timely and appropriate considering the abuse our planet has tolerated these past years. One of the going green ventures that I'm greatly fascinated with is making soaps. Aside from helping the environment, you can actually save money by advocating this practice. Making soap at home is actually so easy and what's so cool about it is that there are many resources in the internet where you can get ideas on how to make soaps.

Most soap making was either dangerous or too time consuming. There are resources that say that lye, an ingredient in making soaps, can cause explosion. Soap curing can take 30 days or more. It is fortunate that there is a solution available to address these concerns. There is now an easy way of making soaps that only takes about 30 minutes without the danger of explosion. With this innovation, it makes soap making available and possible to most of us.

There are four easy steps in soap making. First, we need to prepare the ingredients needed. We just need to buy pure vegetable glycerin bars to start. It is recommended that you buy in 5-pound bars from Clearly Natural Soaps. They are sold in 1, 5, and 25 pound bars of pure vegetable glycerin made without any animal by-products. This is a very practical to conserve our resources and a step towards helping our planet. The soap is called the melt-and-pour.

Next step is to melt the glycerin in a double boiler at about 1.5 pounds at a time. This creates roughly 6 bars of soap. This part of the process will be very simple as glycerin is very easy to cut and melt.

Afterward, essential oils, coloring, and whatever else you want may be added. This is the time to customize or personalize your soap. You may keep it simple by using essential oils like orange oil, lavender, and eucalyptus and yellow, purple, or green colors. You don't have to use them all in the same batch. For the colors, you may use soap color which is commercial available or you can also use food coloring. Just take precautions in using food coloring.

After adding your ingredients, pour the mixture and let sit overnight. It is highly recommended to use a silicone muffin pan because it is flexible. Extracting the bars of soap will be so easy. Any other pans may be used as long as it can withstand the heat from the soap.

After the soap sits overnight, you can now enjoy your homemade soap. Just cut it into bars, of course. Glycerin soap, aside from being less expensive, is actually much better than commercial soaps. With glycerin soap, you will get smaller pores, smoother and more moisturized skin.

Anne Rimando is a freelance writer who got hooked with making home made soaps.